2013 Honda Accord Belts and Cooling Parts
Choose your Part Name for your 2013 Honda Accord
Accessory Drive Belt
Accessory Drive Belt Tensioner
Accessory Drive Belt Tensioner Assembly
Accessory Drive Belt Tensioner Pulley
Automatic Transmission Oil Cooler
Automatic Transmission Oil Cooler Seal
Belt Tensioner Bolt
Engine Coolant Outlet Gasket
Engine Coolant Outlet O-Ring
Engine Coolant Pipe
Engine Coolant Pipe O-Ring
Engine Coolant Reservoir
Engine Coolant Reservoir Cap
Engine Coolant Reservoir Hose Connector
Engine Coolant Temperature Sensor
Engine Coolant Temperature Sensor O-Ring
Engine Coolant Temperature Sensor Seal
Engine Coolant Thermostat
Engine Coolant Thermostat Gasket
Engine Coolant Thermostat Housing Assembly
Engine Coolant Thermostat Housing Gasket
Engine Coolant Thermostat Seal
Engine Cooling Fan
Engine Cooling Fan Blade
Engine Cooling Fan Controller
Engine Cooling Fan Motor
Engine Cooling Fan Shroud Bolt
Engine Cooling Fan Switch
Engine Water Pump
Engine Water Pump Gasket
Engine Water Pump Housing O-Ring
Radiator
Radiator Cap
Radiator Coolant Hose
Radiator Drain Plug
Radiator Insulator
Radiator Support Air Deflector Clip
Radiator Support Splash Shield Clip
Serpentine Belt
Image
Product
Price
- Interference engine application; Timing Belt Driven
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Timing Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Timing Belt Driven: Yes
- Impeller Rotation: Standard
- Includes Back Housing: No
- Pulley Included: Yes
- Impeller Material: Stamped Steel
- Housing Material: Cast Aluminum
- Contents: Water Pump, Rubber Seal Ring
This Part Fits the Following OEM/Substitute Numbers:
12581517, 12607015, 12635743, 131-2285, 135-1530, 18-1915, 19200R70A11, 19200RCAA01, 19200RDMA01, 19200RDMA02, 19200RDVJ01, 2-9363, 20819, 252-896, 41184, 51-2235, 55-9470, 5553423...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Honda Accord | V | 3471 | GAS | 6 Cyl 3.5L | - |
- Radiator cap
- Relief pressure 16 lb
- Standard
- Product Attributes:
- Valve OD: 1.30 In
- Cap Depth: 0.85
- Lever Type:
- No
- Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10242, 10242ST, 12R19, 1640131520, 1640131650, 1640131792, 1640131830, 1640136020, 1640137520, 1640146610, 1640150370, 1640175440, 1650221060, 1650221080, 1678-20126, 17037, 19045PWA004, 19045RAA003...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Honda Accord | L | 2356 | 4 Cyl 2.4L | 144 |
- 14in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- w/Standard Mount Kit; 22/16.2 Amp Draw High/Low; 14-1/2 in. Width; 14-1/2 in. Height; 2-5/8 in. Depth; 8-3/4 in. x 13-1/4 in. Mounting; Single
- 14in. High Output Electric Fan; Std Kit
- Radiator Pusher/Puller Fan
- Product Attributes:
- Diameter (in.): 14.000 In.
-
Features:
- Mounts As Pusher Or Puller w/out Flipping Blade
- State-Of-The-Art Symmetrical Design
- High Output 300 Watt Motor
- 2100 CFM On High Speed/1500 CFM On Low Speed
- A very popular primary cooling fan, this 14 in. High Output Single RAD fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 2100 CFM while drawing up to 22 amps.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Honda Accord |
- Water Outlet Gasket
- FEL-PRO 72926 Water Outlet Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
90307PLC004, 91307PNA003, 91307RTA005
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Honda Accord | L | 2356 | 4 Cyl 2.4L | 144 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Honda Accord | L | 2356 | 4 Cyl 2.4L | 144 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .947
- 24
- Outside Circumference:
- 1454
- 57.25
- OE Comparison Rating: Oe Performance
- Washer Pump Included: Epdm
- Cross Section Designation: K
- Effective Length:
- 1440
- 56.69
- Rib Quantity: 7
- Cord Material: Polyester
- Top Width:
This Part Fits the Following OEM/Substitute Numbers:
11281407975, 11287833265, 25-070566, 311105A2A01, 311105B0Y01, 311105X6J01, 4070566, 4070567, 5070567, 567K7MK, 7K566, 7PK1430, 7PK1440, K070566
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Honda Accord | L | 2356 | GAS | 4 Cyl 2.4L | 144 |
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Honda Accord |
- 13 Row Series 8000 Plate/Fin Transmission Cooler Kit; 11/32in.
- Plate And Fin Style; Aluminum; 11 in. Width; 6-3/4 in. x 6-1/8 in. Mounting; 7-1/4 in. Height; 7/8 in. Depth
- Plate/Fin Transmission Cooler Kit (11/32in.)
- Series 8000 Transmission Cooler Kit
- Product Attributes:
- Gross Vehicle Weight: 17500 Lbs.
-
Features:
- Embossed Turbulators Inserted In Each Tube Agitate Fluid
- Extruded Plastic Cooling Fin Guards
- Improves Transmission Performance
- Sturdy Furnace Brazed Aluminum Construction
- 13 Row Cooler Design
- 3/4 in. Embossed Turbulators Maximize Cooling
- 11/32 in. Hose Barb Inlets
- Rated At 17500 GVW
- Includes Complete Hardware Kit
- 4 Ounces Fluid Capacity
- A step up from Tube & Fin type coolers, this Plate and Fin cooler features strong furnace-brazed construction, 7/8 in. wide plates, 3/4 in. embossed turbulators which maximize heat transfer while also minimizing pressure drop. This unit is perfect for light to medium duty use and occasional towing. It greatly extends transmission life by preventing heat-related transmission failures, and improve shifting performance. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16 in. transmission cooler lines.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2013 - Honda Accord | EX-L |
- Engine Coolant Thermostat Housing Assembly
- Cover Includes Thermostat
- Product Attributes:
- Bolt Hole Center To Bolt Hole Center:
- 2.408
- 2.53
- 2.454
- 2.454 In; 2.408 In; 2.53 In
- Flange Length: 3.476
- Thermostat Included: Yes
- Grade Type: Regular
- Mounting Hardware Included: No
- Package Contents: 1 Thermostat Housing; 1 Thermostat; 1 Gasket
- Bleeder Hole: No
- Flange Thickness: 0.271
- Mounting Hole Quantity: 3
- Inside Diameter: 1.07
- Thermostat Opening Temperature: 172 Deg. F
- Gasket Type: Gasket
- Flange Width: 3.642
- Bolt Hole Center To Bolt Hole Center:
-
Features:
- Ideal replacement - this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design - professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
- This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
This Part Fits the Following OEM/Substitute Numbers:
143-0819, 19301RAF003, 19301RAF004, 193105A2A02, 34048, 34715, 48747, 636-170, 63670, 732-172, 73272, 85938, 9258, 9262, 9301, SK902788
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Honda Accord | L | 2356 | 4 Cyl 2.4L | 144 |
- O-Ring
- Type: O-Ring Use: Thermostat Housing Thermostat seal
- FEL-PRO 35162 O-Ring
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
112911, 112921, 12581520, 19305-PR7-A00, 19305PR7A00, C31207
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Honda Accord | V | 3471 | 6 Cyl 3.5L | - |
Showing 1 - 10 of 105 products
Loading...