Image
Product
Price
- Oil Filter
- H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-14
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04E115561, 04E115561H, 104044, 11421258039, 1164626, 11715272, 1174416, 1183358, 119139, 1205002, 1220406, 1220645, 130144, 132023, 140517050, 1520813210, 1520813212, 1520855400...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1977 - BMW 320i |
- Accufit Oil Drain Plug M22x1.50, 1 per Bag
- Accufit Oil Drain Plug M22x1.50, Bag
- Product Attributes:
- Bolt Grade: 2
- Meets Or Exceeds Oe Manufacture Specs: Yes
- Special Tool Required: No
- Packaging: 1 Per Bag
- Gasket Type: Gasket
- Head Type: Hex
- Magnetic: No
- Thread Type: Fine
- Drain Plug Thread: M22x1.5
- AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93 Percent of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80 Percent. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install - Finger-grip wing for ease of installation. All plugs have 14mm hex - just one wrench works for all. Hi-Temp Gasket - Red hi-temp gasket for max sealing protection. Easy ID - Thread size etched on each plug. Rust Protection - Black oxide coating for rust and corrosion protection. Avoid Cross-Threading - Pilot-point tip to avoid cross-threading during installation.
This Part Fits the Following OEM/Substitute Numbers:
090-055, 090-061, 090-151, 1047, 65223, 65384
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1977 - BMW 630CSi | L | 2985 | 6 Cyl 3.0L | - |
- WIX Spin-On Lube Filter
- Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.966
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 385
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 102 056, 0 451 103 035, 0 451 103 050, 0 451 103 073, 0 451 103 095, 0 451 103 271, 008548999, 008558238, 02/631315, 0410233, 0418988, 0451102002, 051281, 05710631, 065251, 1000000351, 1000249, 1000264...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1977 - BMW 320i | L | 1990 | Canada | 4 Cyl 2.0L | 121 |
Additional Fitment Information:
| Vehicle |
|---|
| 1977 - BMW 630CSi |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 90 x 110 x 12
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1977 - BMW 630CSi | Rear |
Additional Fitment Information:
| Vehicle |
|---|
| 1977 - BMW 530i |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Original
- with PC 201 Style
- Spin-On
Additional Fitment Information:
| Vehicle |
|---|
| 1977 - BMW 320i |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Original
- Except PC 201 Style
- Spin-On
Additional Fitment Information:
| Vehicle |
|---|
| 1977 - BMW 320i |
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1977 - BMW 320i | L | 1990 | Canada | 4 Cyl 2.0L | 121 |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.79 In
- Shell Diameter: 2.53 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
026103485A, 10079, 10115, 11079, 12C27, 14079, 2078-290332, 26103485, 31100, 703-1373, 8079, 9MO79, MO79, P8079, SO79
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1977 - BMW 630CSi | L | 2985 | 6 Cyl 3.0L | - |
Showing 1 - 10 of 113 products
Loading...