Image
Product
Price
- High Flow 62mm; Includes All Required Gaskets And Hardware; No Tune Required;CARB E.O. D-245-21
- Power-Plus Series Throttle Body; High Flow 62mm; Includes All Required Gaskets And Hardware; No Tune Required;
- Power-Plus Series Throttle Body
- Product Attributes:
- Idle AirControl Motor Included: No
- Throttle Body Finish: Cnc Machined
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm (for A List Of Chemicals And More Information Go To Www.p65warnings.ca.gov)
- Original Equipment Replacement: Yes
- Throttle Position Sensor Incl: No
- Throttle Body Material: Cast Aluminum
- Fuel Injectors Included: No
- Throttle Body Type: Power Plus Series
- Throttle Body Spacer Color: Natural
- Throttle Body Spacer Included: No
- Bore Diameter: 62mm
-
Features:
- Direct Fit Bolt On High Flow 62mm Throttle Body
- Increased Air-Flow Over Stock Unit For Addl Horsepower And Torque
- Improved Throttle Response And Acceleration
- New Hardware And Gaskets Included If Required
- No Tune Required
- All New CNC Machined Castings Not A Bored Out Unit
- Factory Style Precision Die Stamped Linkage
- Double Sealed Roller Bearings With O Ringed Shafts
- BBK Is Your Number One Aftermarket Performance Brand
- Designed and Manufactured in USA
- BBK Performance throttle bodies are designed as a direct replacement for the restrictive stock factory throttle body. All BBK Power Plus throttle bodies offer OEM drive ability but with up to 30% improved airflow for improved horsepower, torque and throttle response. Every BBK throttle body is CNC Machined from a new high quality 356 aluminum casting and assembled with features like OEM style die stamped throttle linkages, double sealed bearings, and o ringed throttle shafts to make every BBK throttle body the best on the market today. All BBK Performance throttle bodies are designed to improve performance and they work with the vehicles factory tune. No tune is required and BBK throttle bodies are available for many late model American muscle cars and trucks. 50 State Legal CARB Approved.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Jeep Cherokee | L | - | 6 Cyl 4.0L | 242 |
- Not Legal For Sale Or Use On Vehicles Registered In California
- Throttle Body;
- Throttle Body
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Throttle Body
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Dodge Caliber | L | 1998 | 4 Cyl 2.0L | 122 |
- Direct Replacement
- Powr-Flo™ Throttle Body; Direct Replacement;
- Powr-Flo™ Throttle Body
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm
-
Features:
- Modified Air Inlet To Improve Airflow And Throttle Response
- Unique Design Increases Air Velocity To The Intake Manifold
- Pre-Installed Calibrated Electronics For Optimum Performance
- Direct Replacement Of Stock Throttle Body
- CNC Machined Aircraft-Quality Aluminum Casting
- Made In The U.S.A.
- The JET Powr-Flo Throttle Body is a direct replacement for the factory unit. It can be used to replace a worn out throttle body or to upgrade the existing throttle body. JET Powr-Flo Throttle Body provides increased air flow for improved throttle response by taking advantage of JET's unique inlet design. JET Powr-Flo Throttle Bodies include all NEW pre-installed calibrated electronics to allow for a simple 'remove and replace' installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Ford Mustang | V | 4951 | 8 Cyl 5.0L | GT Premium | 302 |
- Electronic Throttle Body
- Product Attributes:
- Electrical Connection Type: Male
- Terminal Count: 6
- Adjustable: No
- Package Contents: 1 Throttle Body Unit
- Throttle Body Finish: Natural
- Throttle Body Mounted: No
- Throttle Position Sensor Included: Yes
- Connector/Terminal Type: Pin
- Installation Hardware Included: No
- Housing Material: Aluminum/pbt
-
Features:
- Upgraded replacement - this electronic throttle body features enhanced internal components to prevent future failures
- New construction - 100% new case aluminum, not remanufactured, for reliability and convenience of no core charge
- Complete assembly - each unit includes new throttle position sensor for full repair
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- Original equipment throttle bodies often fail from liquid intrusion and excessive wear on internal electronics. This Dorman OE FIX features a non-moving Hall effect sensor and shaft seal to prevent future failures.
This Part Fits the Following OEM/Substitute Numbers:
4891735AC, 4891735AD, 67-7002, 6E-7002, ETB10008, NTB1064, S20176, SK977025, TB1150
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Avenger | L | 2360 | 4 Cyl 2.4L | 144 |
- Electronic Throttle Body
- Dual Row Connector
- Product Attributes:
- Electrical Connection Type: Male
- Terminal Count: 6
- Adjustable: No
- Package Contents: 1 Throttle Body Unit
- Throttle Body Finish: Natural
- Throttle Body Mounted: No
- Throttle Position Sensor Included: Yes
- Connector/Terminal Type: Pin
- Installation Hardware Included: No
- Housing Material: Aluminum/pbt
-
Features:
- Upgraded replacement - this electronic throttle body features enhanced internal components to prevent future failures
- New construction - 100% new case aluminum, not remanufactured, for reliability and convenience of no core charge
- Complete assembly - each unit includes new throttle position sensor for full repair
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- Original equipment throttle bodies often fail from liquid intrusion and excessive wear on internal electronics. This Dorman OE FIX features a non-moving Hall effect sensor and shaft seal to prevent future failures.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Dodge Journey | L | 2360 | 4 Cyl 2.4L | 144 |
- Electronic Throttle Body Assembly
- Product Attributes:
- Electrical Connection Type: Connector
- Terminal Count: 6
- Inlet Diameter: 2.15
- Package Contents: 1 Electronic Throttle Body
- Throttle Body Finish: Gray
- Throttle Position Sensor Included: Yes
- Idle Air Control Motor Included: No
- Installation Hardware Included: No
- Fuel Injectors Included: No
- Venturi Quantity: 0
- Adjustable: No
- Throttle Body Mounted: Yes
- Connector/Terminal Type: Blade
- Inlet Type: Non-flanged
- Throttle Body Type: Electronic
- Fuel System Type: Gas
- Throttle Body Spacer Included: No
- Housing Material: Aluminum
- Bore Diameter: 2.047
- Outlet Diameter: 2.1
- Outlet Type: Flanged
-
Features:
- New construction - 100% new case aluminum - not remanufactured - for reliability and convenience of no core charge
- Direct replacement - this plug-and-play replacement throttle body features a non-contact Hall effect sensor to prevent future failures from contact wear
- Ready to install - this new throttle body includes a pre-installed throttle position sensor for simple installation
- Quality engineering - endurance proven with over 1 million cycle tests
- The original equipment throttle body often fails from excessive wear on internal electronics. This 100% new Dorman OE FIX throttle body features a non-contact Hall effect sensor to prevent future failures from contact wear.
This Part Fits the Following OEM/Substitute Numbers:
25181982, 25183237, S20037, SKTB1031, TB1031
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Pontiac G3 | L | 1588 | 4 Cyl 1.6L | 98 |
- Electronic Throttle Body
- Product Attributes:
- Electrical Connection Type: Female Blade
- Terminal Count: 6
- Package Contents: 1 Fuel Injection Throttle Body
- Throttle Body Finish: Silver
- Throttle Position Sensor Included: Yes
- Idle Air Control Motor Included: No
- Installation Hardware Included: No
- Outlet Quantity: 0
- Fuel Injectors Included: No
- Inlet Quantity: 0
- Venturi Quantity: 0
- Adjustable: No
- Throttle Body Mounted: No
- Connector/Terminal Type: Blade
- Throttle Body Type: Electronic
- Fuel System Type: Gas
- Throttle Body Spacer Included: No
- Housing Material: Aluminum
- Bore Diameter: 2.55
-
Features:
- Direct replacement - this electronic throttle body matches the original equipment throttle body for fit and function
- Plug and play installation - this throttle body plugs into the original equipment wiring harness with no adapter required
- Cost-effective and reliable - offers original manufacturer quality at a competitive price with no core charge
- Rigorously tested - this throttle body has undergone corrosion and try-on testing to ensure durability for a long service life
- This 100% new electronic throttle body matches the original equipment part for fit and performance. With a corrosion-resistant aluminum body, it features a new sensor and circuit board for reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
67-6005, 67-6014, 8S4Z9E926A, 8S4Z9E926B, S20027, TB1054
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford Transit Connect | L | 1999 | 4 Cyl 2.0L | 122 |
- Electronic Throttle Body Assembly
- Product Attributes:
- Electrical Connection Type: Connector
- Terminal Count: 6
- Inlet Diameter: 3.15
- Package Contents: 1 Electronic Throttle Body
- Throttle Body Finish:
- Black
- Gray
- Throttle Position Sensor Included: Yes
- Idle Air Control Motor Included: No
- Installation Hardware Included: No
- Fuel Injectors Included: No
- Venturi Quantity: 0
- Adjustable: No
- Throttle Body Mounted: Yes
- Connector/Terminal Type: Blade
- Inlet Type: Non-flanged
- Throttle Body Type: Electronic
- Fuel System Type: Gas
- Throttle Body Spacer Included: No
- Housing Material: Aluminum
- Bore Diameter: 3.15
- Outlet Diameter: 3.15
- Outlet Type: Non-flanged
-
Features:
- New construction - 100% new case aluminum, not remanufactured, for reliability and convenience of no core charge
- Direct replacement - this plug-and-play replacement throttle body features enhanced internal components to prevent future failures
- Complete assembly - each unit includes new throttle position sensor for full repair
- Quality engineering - endurance proven with over 1 million cycle tests
- Original equipment throttle bodies often fail from moisture and oil intrusion and excessive wear on internal electronics. This Dorman OE FIX features a non-contact Hall effect sensor and shaft seal to prevent future failures.
This Part Fits the Following OEM/Substitute Numbers:
161198J100, 161198J10C, 1611KAL60BRE, 67-7004, 6E-0001, ETB0011, ETB0013, NTB1006, S20057, S20058, SKTB1001, TB1001, TB1047, TBN017
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - INFINITI G35 | V | 3498 | 6 Cyl 3.5L | - |
- Electronic Throttle Body
- Product Attributes:
- Electrical Connection Type: Male
- Terminal Count: 6
- Mounting Hardware Included: No
- Inlet Diameter: 64
- Throttle Body Finish:
- Natural
- Silver
- Fuel System Grade: Gas
- Throttle Body Material: Aluminum
- Fuel System Injection Type: Gas
- Venturi Quantity: 0
- Adjustable: No
- Connector/Terminal Type: Blade
- Inlet Type: Non-flanged
- Fuel System Type: Gas
- Bore Diameter: 64
- Outlet Diameter: 66.8
- Package Contents: 1 Throttle Body Unit
- Throttle Position Sensor Included: Yes
- Idle Air Control Motor Included: No
- Installation Hardware Included: No
- Fuel Injectors Included: No
- Throttle Body Mounted: No
- Throttle Body Type: Electronic
- Airflow Rate: 99
- Throttle Body Spacer Included: No
- Housing Material: Aluminum; Plastic
- Outlet Type: Non-flanged
-
Features:
- Upgraded replacement - this electronic throttle body features enhanced internal components to prevent future failures
- New construction - 100% new case aluminum, not remanufactured, for reliability and convenience of no core charge
- Complete assembly - each unit includes new throttle position sensor for full repair
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- Original equipment throttle bodies often fail from liquid intrusion and excessive wear on internal electronics. This Dorman OE FIX features a non-moving Hall effect sensor and shaft seal to prevent future failures.
This Part Fits the Following OEM/Substitute Numbers:
408238725001Z, 67-7006, NTB1047, S20120, SKTB1038, TB1038
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Dodge Magnum | V | 2736 | 6 Cyl 2.7L | 167 |
- Electronic Throttle Body
- Product Attributes:
- Electrical Connection Type: Female
- Throttle Body Finish: Natural
- Mounting Hardware Included: No
- Inlet Diameter: 2.6
- Fuel System Grade: Gas
- Throttle Body Material: Aluminum
- Fuel System Injection Type: Gas
- Venturi Quantity: 0
- Adjustable: No
- Connector/Terminal Type: Blade
- Inlet Type: Flanged
- Fuel System Type: Gas
- Bore Diameter: 2.6
- Outlet Diameter: 2.57
- Package Contents: 1 Electronic Throttle Body
- Throttle Position Sensor Included: Yes
- Idle Air Control Motor Included: No
- Installation Hardware Included: No
- Fuel Injectors Included: No
- Throttle Body Mounted: No
- Throttle Body Type: Electronic
- Throttle Body Spacer Included: No
- Housing Material: Aluminum
- Outlet Type: Flanged
-
Features:
- New construction - 100% new case aluminum, not remanufactured, for reliability and convenience of no core charge
- Direct replacement - this plug-and-play replacement throttle body features enhanced internal components to prevent future failures
- Complete assembly - each unit includes new throttle position sensor for full repair
- Quality engineering - endurance proven with over 1 million cycle tests
- Original equipment throttle bodies often fail from moisture and oil intrusion and excessive wear on internal electronics. This Dorman OE FIX features a non-contact Hall effect sensor and shaft seal to prevent future failures.
This Part Fits the Following OEM/Substitute Numbers:
2173349, 67-3004, S20013, TB1034, TB1035
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - GMC Canyon | L | 2770 | 4 Cyl 2.8L | 169 |
Showing 1 - 10 of 845 products
Loading...