Image
Product
Price
- Hood;
- Hood
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Hood
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Jeep CJ5 |
- Aluminum; Hood Plate w/Mounting Hardware
- Aluminum Hood Plate; Aluminum; Hood Plate w/Mounting Hardware;
- Aluminum Hood Plate
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Certain Chemicals; Which Are Known To The State Of Ca To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For Mor Information Go To: Www.p65warnings.ca.gov
-
Features:
- Aluminum Hood Plate
- Owens Products is an aftermarket automotive accessory manufacturer. With 50 years experience we are a reliable manufacturer that continues to innovate and produce new products to the market. Looking to open up a Jeep division, Owens is bringing on key members from the Jeep community to actively engage and seek out what the Jeep community needs. Yes we are a fresh face in the Jeep community, but we hope to bring new innovative products, participate in events, and most importantly see you all out on the Trails!
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Jeep Wrangler |
- ; Gray Primer
- Venum II Fiberglass Sport Hood
- The Owens Venum II Jeep Performance Sport Hood is a sporty option for those that do not need heat reduction. The Venum II hood is designed specifically for the 2007-2018 Jeep Wrangler two door and four door models. Venum hoods have been tested across the nation at various off-road parks and climate levels to ensure that you are getting the best hood on the market for your Jeep. Constructed of fiberglass and reinforced with aluminum strength supports, the Venum Hood nearly reduces the weight by 50% and will keep a solid structure for rock crawling and off-road use. With each hood being hand crafted here in the USA, we take pride in our craftsmanship and you will see for yourself how the fitment and overall quality of our hoods are second to none. The hoods are ready for paint out of the box with minimal prep work for a body shop to paint them. **This product comes with a gray primer finish and is unpainted and unfinished. Owens does not provide a pre-paint or paint match option, customer is responsible for paint and finished product of hood**
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Jeep Wrangler |
- Vented Special Edition Design; Paintable/Protective Finish
- Heat Dispersion Hood; Vented Special Edition Design; Paintable/Protective Finish;
- Heat Dispersion Hood
-
Features:
- Jeep JK Heat Hood
- Better Engine Cooling
- Works In Conjunction With Inner Fenders
- Comes In A Paintable Protective Finish
- Made With Metal
- Fits 2007-2018 Jeep JK Wrangler
- Sold As Each
- Prep Required before Paint
- DV8 Heat Dispersion vented special edition design paintable For 2007 - 2018 Jeep Wrangler all models.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Jeep Wrangler |
- 10th Anniversary; Vented Special Edition Design; Paintable
- Heat Dispersion Hood; 10th Anniversary; Vented Special Edition Design; Paintable;
- Heat Dispersion Hood
-
Features:
- 10th Anniversary Jeep JK Hood
- Better Engine Cooling
- Works In Conjunction With Inner Fenders
- Aggressive Design
- Comes Ready To Paint
- Comes With Vents
- Fits 2007-2018 Jeep Wrangler
- Sold As Each
- DV8 10th anniversary vented special edition design paintable For 2007-2018 Jeep Wrangler all models.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2007 - Jeep Wrangler | Unlimited Rubicon |
- Dual Vented; Includes Under Hood Insulation Liner/DV8 Side Vents; Bolt-On; Stamped Steel; Prepped w/Rust Inhibitor
- Heat Dispersion Hood; Dual Vented; Includes Under Hood Insulation Liner/DV8 Side Vents; Bolt-On; Stamped Steel; Prepped w/Rust Inhibitor;
- Heat Dispersion Hood
-
Features:
- Better Engine Cooling
- Works In Conjunction With DV8 Inner Fenders
- Aggressive Design
- Stamped Steel Hood For Precise Fit And Finish
- Comes With DV8 Side Vents / Pictured
- Completely Bolt On
- Comes In Matte Black Protective Coating
- Only Ships LTL
- The DV8 Offroad Heat Hood is designed to expel heat from the engine compartment of your 2018 and up Jeep JL. It works well in conjunction with DV8 inner fenders (INFEND-03FB) to keep the engine bay as cool and well ventilated as possible and gives a unique look to the Wrangler.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Jeep Wrangler | Unlimited Sahara |
- Rubicon Replica; Dual Vented; Includes Under Hood Insulation Liner; Stamped Steel; Prepped w/Rust Inhibitor
- Heat Dispersion Hood; Rubicon Replica; Dual Vented; Includes Under Hood Insulation Liner; Stamped Steel; Prepped w/Rust Inhibitor;
- Heat Dispersion Hood
-
Features:
- Made From Stamped Steel / Strong And Light Weight
- Insulated Under Hood Liner Included
- Prepped With A Rust Inhibitor And Ready To Be Primed For Paint
- DV8 Rubicon Replica Hood For JL 2018+ Jeep Wrangler all models. Constructed from stamped steel offering added strength and reduced weight. This design is meant as an upgrade for the standard JL Wrangler hood. Our hoods come with an under hood insulation liner and are prepped with a rust inhibitor ready to be prepped, painted, and installed. Note: Recommend professional installation including prep, fitting, seam sealer and painting for ultimate fitment. Always test fit before painting.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2018 - Jeep Wrangler | Rubicon |
- May Not Work With LED Mounts Designed For Factory Hood
- Vented Performance Hood;
- Vented Performance Hood
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Durable
- Steel Construction
- Air Vents For Heat Dissipation
- Laser-cut For A Precise Fit
- Easy
- Bolt-on Installation
- Retains Factory Wash Nozzles
- Ready To Paint! Arrives Coated In Black Primer
- Upgrade your Jeep with the aggressive good looks of Rough Countrys Vented Hood for Jeep JK models. Inspired by the 50th annual Easter Jeep Safari Trailcat concept, this sleek yet rugged hood gives your vehicle an undeniably unique look thats sure to turn heads. This steel hood features multiple air vents that provide greater heat dissipation to your engine bay to promote cooler temperatures. Each hood is created using a precise CNC laser-cut technique to ensure an exact fit for your vehicle. Rough Countrys Vented JK Hood is coated in a durable black primer and arrives ready to be painted.This easy-to-install hood upgrade uses a simple, bolt-on installation process that can be performed in no time flat! Rough Countrys Vented JK Hood features integrated recesses that allow you to retain any factory or aftermarket hood latch for ease of use as well as re-location holes that allow you to retain the factory washer nozzles. This kit also includes a solution for 07-13 models to upgrade from a single nozzle to a dual nozzle setup. Give your JK improved airflow and aggressive good looks today!
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2007 - Jeep Wrangler | 4WD |
- Black Powder Coating
- Powder Coated Hood Louver; Black Powder Coating;
- Powder Coated Hood Louver
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Improves Airflow To Engine Bay
- CNC Laser-Cut Aluminum
- Aggressive Good Looks
- Ships Painted
- Durable Black Powdercoating
- Give your Jeep better airflow and an improved, aggressive look with Rough Countrys Powder Coated JK Hood Louver! This stylish hood upgrade is made of CNC laser-cut aluminum for a precise fit and powder coated black for aggressive, good looks.Whether youre rock crawling or simply waiting in traffic, an engine that runs too hot can cause all sorts of complications. This vented hood allows hot air to dissipate faster, providing better air circulation into the engine bay of a slow-moving vehicle. Improving airflow in your engine bay now can mean less expensive repairs and maintenance costs down the road.Rough Countrys JK Hood Vent includes black rivets spanning the outside edges for a rugged and interesting look. Each unit features a durable, black powder coat to resist the elements and laser-cut 'œRC' logo. Improve the look and functionality of your Jeep today!
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2018 - Jeep Wrangler JK | Sahara |
- HOOD
- CW-style carbon fiber hood for 2015-2018 Subaru WRX/STi
- Seibon Hood
- Product Attributes:
- Prop 65 Warning Chemical Listing: Styrene, Bisphenol A
- Install Type: Professional Installation Required.
- Non-Stock Item: Y
- Category: Hood
- Prop 65 Warning Label: Prop65warninggraphic.jpg
- CARB Yes/No: No
- Style: Cw
- Title: Seibon Carbon, Hd15sbimp-cw, Cw-style Carbon Fiber Hood For 2015-2018 Subaru Wrx/sti
- Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Styrene, Which Is Known To The State Of California To Cause Cancer, And Bisphenol A, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Informat
- Prop 65 (C, R or CR): Cr
- Install Hardware: Utilizes Oe Hardware
-
Features:
- Durable and lightweight
- Show-ready. No painting required.
- Uses professional, high qauality 3K 2X2 twill weave carbon fiber fabric.
- Reuses OEM install hardware
- Promotes heat extraction
- Seibon Carbon components are carefully hand-crafted using only the finest materials. Our production team offers superior craftsmanship with over 20 years of experience working with carbon fiber. Every component is constructed with a consistent weave pattern. Our production processes allows exceptional carbon/resin ratio, creating high product stiffness that also leads to extra strength. For a stunning finish, our products are coated with a glossy clear coat that does not chip or flake. We meticulously inspect all of our components and stand firmly behind our products so that you can enjoy peace of mind with every genuine Seibon Carbon product. Creating performance-oriented products that help shed unnecessary weight without sacrificing style is our specialty. Race after race, Seibon products have proven to be as strong as the driver's ambition to win, thus making Seibon Carbon the preferred brand among professional drivers.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2018 - Subaru WRX STI | United States |
Showing 1 - 10 of 12 products
Loading...