Image
Product
Price
- This is also the Timing Belt Idler Pulley, so you will need 2-pcs. if you are replacing both the Idler Pulley and the Tensioner Pulley.
- W/ Bearing
Additional Fitment Information:
| Vehicle | Cylinder Head Type | Aspiration |
|---|---|---|
| 1999 - Mitsubishi Eclipse | DOHC | Naturally Aspirated |
- Production: 01/01/1994-, This is also the Timing Belt Tensioner Pulley, so you will need 2-pcs. if you are replacing both the Idler Pulley and the Tensioner Pulley.
- W/ Bearing
Additional Fitment Information:
| Vehicle | Aspiration | Prod. Date Range |
|---|---|---|
| 1995 - Mitsubishi Eclipse | Naturally Aspirated | Fr:01-01-94 |
- This is also the Timing Belt Tensioner Pulley, so you will need 2-pcs. if you are replacing both the Idler Pulley and the Tensioner Pulley.
- W/ Bearing
Additional Fitment Information:
| Vehicle | Cylinder Head Type | Aspiration |
|---|---|---|
| 1997 - Mitsubishi Eclipse | DOHC | Naturally Aspirated |
- with Mechanical Tensioner System
It is reccomended per Technical Service Bulletin 09-06-00 that Mechanical Tensioner equipped engines be converted over to a Hydraulic Tensioner System. See conversion kit Part Number 5018400AB. - W/ Bearing
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Plymouth Breeze | L | 1996 | 4 Cyl 2.0L | 122 |
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 1998 - Eagle Talon | Naturally Aspirated |
- with Original Design Tensioner.
Pulley only-Must reuse original bracket.
(This Part Number replaces the Original Design Adjuster. Engine has not been updated to Later Design Components. OE no longer supplies the original design.) - W/ Bearing
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Dodge Intrepid |
- with Hydraulic Tensioner
- W/ Bearing
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Dodge Stratus | L | 1996 | 4 Cyl 2.0L | 122 |
Additional Fitment Information:
| Vehicle | Cylinder Head Type |
|---|---|
| 1998 - Dodge Neon | DOHC |
- with Mechanical Tensioner System
It is reccomended per Technical Service Bulletin 09-06-00 that Mechanical Tensioner equipped engines be converted over to a Hydraulic Tensioner System. See conversion kit available A5030. - W/ Bearing
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Dodge Stratus | L | 1996 | 4 Cyl 2.0L | 122 |
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2001 - Chrysler Voyager | Front Lower | LX |
Showing 1 - 10 of 29 products
Loading...