Mercury Tools and Equipment Parts
Image
Product
Price
- Engine Oil Priming Tool
- 1/4 Inch Hex Shaft
- Engine Oil Priming Tool
- Stock
- Product Attributes:
- Diameter:
- 0.25
- 0.250
- 6.0
- 6.35
- Operation Type: Electrical
- Length:
- 228.60
- 229.0
- 9.0
- 9.000
- Title: Engine Oil Pump Primer
- Diameter:
-
Features:
- 1/4 Inch Hex Shaft
- Made In USA. Melling Engine Oil Priming Tools were developed as a way for engine builders to safely pre-prime the engine with oil prior to the initial engine startup. The Priming tool, with the use of a standard drill circulates oil to all of the critical areas of the new engine quickly and safely.
This Part Fits the Following OEM/Substitute Numbers:
PT11
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1984 - Mercury Grand Marquis | V | - | 8 Cyl 5.0L | 302 |
- 12000 lbs. Rated Line Pull; 18.7 C.I. Hydraulic Motor; w/Roller Fairlead; 100 ft. Cable
- H12000 Hydraulic Winch; 12000 lbs. Rated Line Pull; 18.7 C.I. Hydraulic Motor; w/Roller Fairlead; 100 ft. Cable;
- H12000 Hydraulic Winch
- Product Attributes:
- Voltage: Hydraulic
- Rated Single Line Pull (lbs.): 12000
- WARNING CA Proposition 65: No
-
Features:
- Mounts To Front Or Rear Of Vehicle
- Can Be Permanent Or Detachable
- Free spooling
- Mechanical Lock
- Sealed Against Elements
- Can Be Used Under Water
- Corrosion Resistant
- Stainless Steel Tie Bars And Fasteners
- Reversible Mounting
- Limited Warranty
- Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Mercury Mountaineer |
- 12000 lbs. Rtd Line Pul; 18.7 C.I. 12V Hydrlic Mtr; w/Rlr Fairlead; 100 ft. Cbl; Adptr Sold Separately Req For Install
- HI12000 Hydraulic Winch; 12000 lbs. Rtd Line Pul; 18.7 C.I. 12V Hydrlic Mtr; w/Rlr Fairlead; 100 ft. Cbl; Adptr Sold Separately Req For Install;
- HI12000 Hydraulic Winch
- Product Attributes:
- Voltage: 12 Dc
- Rated Single Line Pull (lbs.): 12000
- WARNING CA Proposition 65: No
-
Features:
- Mounts To Front Of Vehicle
- Can Be Permanent Or Detachable
- Free spooling
- Mechanical Lock
- Sealed Against Elements
- Can Be Used Under Water
- Corrosion Resistant
- Stainless Steel Tie Bars And Fasteners
- Reversible Mounting
- Limited Warranty
- Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Mercury Mountaineer |
- 18000 lb. Capacity; 1 Speed
- H Series Hydraulic Winch; 18000 lb. Capacity; 1 Speed;
- H Series Hydraulic Winch
- Product Attributes:
- Voltage: Hydraulic
- Rated Single Line Pull (lbs.): 18000
- WARNING CA Proposition 65: No
-
Features:
- 2 Speed
- Freespooling
- Mechanical Lock
- Can Use Underwater
- Corrosion Resistant
- Stainless Steel Tie Bars And Fasteners
- 100 ft. Galvanized Aircraft Cable
- Power Steering Pump Powered
- 100 Percent Duty Cycle
- The Mile Marker H Series Hydraulic W in. can be mounted to the front or rear of the vehicle as a permanent or detachable recovery system.
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Mercury Mountaineer |
- 9000 lbs. Rated Line Pull; 14 C.I. Hydraulic Motor; w/Roller Fairlead; 100 ft. Cable
- H9000 Hydraulic Winch; 9000 lbs. Rated Line Pull; 14 C.I. Hydraulic Motor; w/Roller Fairlead; 100 ft. Cable;
- H9000 Hydraulic Winch
- Product Attributes:
- Voltage: Hydraulic
- Rated Single Line Pull (lbs.): 9000
- WARNING CA Proposition 65: No
-
Features:
- Mounts To Front Or Rear Of Vehicle
- Can Be Permanent Or Detachable
- Free spooling
- Mechanical Lock
- Sealed Against Elements
- Can Be Used Under Water
- Corrosion Resistant
- Stainless Steel Tie Bars And Fasteners
- Reversible Mounting
- Limited Warranty
- Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2005 - Mercury Mountaineer | Luxury |
- For Truck/SUV; 18000 lb. Capacity
- SEC18 ES Premium Winch; For Truck/SUV; 18000 lb. Capacity;
- SEC18 ES Premium Winch
- Product Attributes:
- Voltage: Na
- Rated Single Line Pull (lbs.): 18000
- WARNING CA Proposition 65: No
-
Features:
- Planetary Gear System For Fast Line Speed
- Automatic Load-Holding Brake
- Free Spooling
- Power In And Out
- Low Electric Current
- Waterproof - Fully Submersible
- Mile Marker's most powerful electric w in. to date: the SEC18(es). With 18,000 pounds of pulling and recovery power, this electric w in. can be utilized in many applications from tow trucks to industrial DC; due to its relatively light weight and wide range of accommodations. The SEC18(es) features fast line speed, is completely sealed, and meets SAE J706 Standards.
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Mercury Mountaineer |
- 12000 lbs. Rated Line Pull; 18.7 C.I. Hydraulic Motor; w/Roller Fairlead; 100 ft. Cable
- H12000 Hydraulic Winch; 12000 lbs. Rated Line Pull; 18.7 C.I. Hydraulic Motor; w/Roller Fairlead; 100 ft. Cable;
- H12000 Hydraulic Winch
- Product Attributes:
- Voltage: Hydraulic
- Rated Single Line Pull (lbs.): 12000
- WARNING CA Proposition 65: No
-
Features:
- Mounts To Front Or Rear Of Vehicle
- Can Be Permanent Or Detachable
- Free spooling
- Mechanical Lock
- Sealed Against Elements
- Can Be Used Under Water
- Corrosion Resistant
- Stainless Steel Tie Bars And Fasteners
- Reversible Mounting
- Limited Warranty
- Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Mercury Mountaineer |
- 12000 lbs. Rtd Line Pul; 18.7 C.I. 12V Hydrlic Mtr; w/Rlr Fairlead; 100 ft. Cbl; Adptr Sold Separately Req For Install
- HI12000 Hydraulic Winch; 12000 lbs. Rtd Line Pul; 18.7 C.I. 12V Hydrlic Mtr; w/Rlr Fairlead; 100 ft. Cbl; Adptr Sold Separately Req For Install;
- HI12000 Hydraulic Winch
- Product Attributes:
- Voltage: 12 Dc
- Rated Single Line Pull (lbs.): 12000
- WARNING CA Proposition 65: No
-
Features:
- Mounts To Front Of Vehicle
- Can Be Permanent Or Detachable
- Free spooling
- Mechanical Lock
- Sealed Against Elements
- Can Be Used Under Water
- Corrosion Resistant
- Stainless Steel Tie Bars And Fasteners
- Reversible Mounting
- Limited Warranty
- Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Mercury Mountaineer |
- 18000 lb. Capacity; 1 Speed
- H Series Hydraulic Winch; 18000 lb. Capacity; 1 Speed;
- H Series Hydraulic Winch
- Product Attributes:
- Voltage: Hydraulic
- Rated Single Line Pull (lbs.): 18000
- WARNING CA Proposition 65: No
-
Features:
- 2 Speed
- Freespooling
- Mechanical Lock
- Can Use Underwater
- Corrosion Resistant
- Stainless Steel Tie Bars And Fasteners
- 100 ft. Galvanized Aircraft Cable
- Power Steering Pump Powered
- 100 Percent Duty Cycle
- The Mile Marker H Series Hydraulic W in. can be mounted to the front or rear of the vehicle as a permanent or detachable recovery system.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Mercury Mountaineer |
- ES Premium Truck/SUV/Jeep; 12000 lb. Capacity; w/SR
- SEC12 Winch; ES Premium Truck/SUV/Jeep; 12000 lb. Capacity; w/SR;
- SEC12 Winch
- Product Attributes:
- Voltage: Na
- Rated Single Line Pull (lbs.): 12000
- WARNING CA Proposition 65: No
-
Features:
- Planetary Gear System For Fast Line Speed
- Automatic Load-Holding Brake
- Free Spooling
- Power In And Out
- Low Electric Current
- Waterproof - Fully Submersible
- Heavy Duty Series Wound Motors and rugged planetary gear sets are the backbone of this expedition grade w in. series. Featuring 19 seals throughout the assembly to keep any and all contaminants outside of the unit. The totally redesigned exterior features NO CHROME construction: stainless hardware, black zinc clutch handles, and anodized aluminum tie bars. Each roller fairlead is now coated with Dacromet(R), a world-class metal coating known for its anti-corrosion properties. Mile Marker has also implemented a new submersible solenoid design with marine-grade connections at the Remote Control plug and socket.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2005 - Mercury Mountaineer | Premier |
Showing 1 - 10 of 26 products
Loading...