Image
Product
Price
- Oil Filter
- H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-14
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04E115561, 04E115561H, 104044, 11421258039, 1164626, 11715272, 1174416, 1183358, 119139, 1205002, 1220406, 1220645, 130144, 132023, 140517050, 1520813210, 1520813212, 1520855400...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Ford Maverick |
- Tapered Roller Bearing Cone and Cup Assembly
- 6.75 in. Ring Gear
- Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1976 - Ford Maverick | Front Inner | RWD |
- ANCO Conventional 31 Series Wiper Blades 16
- Original Blade Type To install, use included 7mm Bayonet Adapter (part number 48-12)
- ANCO 31-Series Wiper Blade (Pack of 1)
- 31-Series
- Product Attributes:
- Adapters Required: No
- Pressure Point Quantity: 6
- Adapters Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: J-hook: 9x3mm; Classic Side-pin: 3/16"; Classic Bayonet: 7mm
- Blade Material: Duraklear - Natural Rubber
- Frame Material: Metal; Plastic
- Blade Type: Conventional/bridge
- Refillable: Yes
- The 31-Series KwikConnect wiper blade boasts reliable wiper performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-7075205, 14008193, 16-1, 16-2, 16-51, 16-52, 1623088-C1, 1668394, 1690023-C91, 170397, 1704770, 1707397, 1708044, 22122111, 2580416, 2580417, 2771906, 2889847...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1970 - Ford Maverick | Front |
- 16" TRICO Exact Fit Wiper Blade
- 9mm Hook, 3/16" Side Lock, 7mm Bayonet
- TRICO Exact Fit
- Provides original factory quality for vehicles with metal conventional wipers
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1973 - Ford Maverick | Front |
- 16" TRICO Tech Beam Blade
- 9mm Hook, 9x4 Hook, 3/16" Side Lock, 7mm Bayonet, Side Pin (17mm), Pinch Tab, Push Button (22mm), Push Button (19mm)
- TRICO Tech
- All-weather durability
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1974 - Ford Maverick | Front |
- Bosch DirectConnect Wiper Blade
- DirectConnect
- Product Attributes:
- Adapters Included: Yes
- Unit(s) per Car Qty (ORLY): 2
- Cases Per Pallet (ORLY): 92
- Quick Connect Hardware Included: Yes
- Frame Color: Black
- Wiper Blade Design: All-season
- Attached Spoiler / Aerofoil: No
- Blade Material: Natural Rubber W/graphite
- Frame Material: Steel
- Heated (Wiper Blade): No
- Blade Type: Bracket
-
Features:
- Dual steel tension springs supports the wiping edge for a consistent clean wipe
- Graphite-treated wiping edge reduces friction and noise
- Flow-through frame reduces blade lift-off
- Quick and easy installation
- All steel frame construction for dependable wiping
- Pluma limpiaparabrisas Bosch DirectConnect
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1974 - Ford Maverick | Front |
- Coil Spring Set
- without Air Conditioning Constant Rate Spring
- MOOG 8088 Coil Spring Set
- Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
- 14.96
- 380.00
- Wire Diameter:
- 0.59
- 15.00
- Front Spring Compressed Length:
- 228.60
- 9.00
- Rear Spring Compressed Length:
- 228.60
- 9.00
- Front Spring Outside Diameter: 5.060
- Front Spring Relaxed Length:
- 14.96
- 380.00
- Rear Spring Outside Diameter: 5.060
-
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
This Part Fits the Following OEM/Substitute Numbers:
277-1831, 45H0016, 585-1016, 630.65004, 831-8088, C3DZ-5310AA, C3DZ-5310J, C3DZ-5310M, C4DZ-5310B, C5GY-5310D, C5GY-5310E, C5ZZ-5310A, C5ZZ-5310B, C5ZZ-5310C, C5ZZ-5310D, CS8088, DODZ-5310B, FCS8088S...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Doors | Engine | Body | CID |
|---|---|---|---|---|---|---|---|
| 1972 - Ford Maverick | L | 4098 | Front | 2 | 6 Cyl 4.1L | Sedan | 250 |
- Coil Spring Set
- with Air Conditioning Constant Rate Spring
- MOOG 8088 Coil Spring Set
- Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
- 14.96
- 380.00
- Wire Diameter:
- 0.59
- 15.00
- Front Spring Compressed Length:
- 228.60
- 9.00
- Rear Spring Compressed Length:
- 228.60
- 9.00
- Front Spring Outside Diameter: 5.060
- Front Spring Relaxed Length:
- 14.96
- 380.00
- Rear Spring Outside Diameter: 5.060
-
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Doors | Engine | Body | CID |
|---|---|---|---|---|---|---|---|
| 1970 - Ford Maverick | L | 2786 | Front | 2 | 6 Cyl 2.8L | Sedan | 170 |
- Bosch Micro Edge Wiper Blade
- Micro Edge
- Product Attributes:
- Prop 65 Warning Label Required?: No
- Adapters Included: No
- Quick Connect Hardware Included: Yes
- Frame Color: Black
- Wiper Blade Design: All-season
- Attached Spoiler / Aerofoil: No
- Blade Material: Dual Rubber
- Heated (Wiper Blade): No
- Blade Type: Bracket
-
Features:
- Triple corrosion protection for increased durability and long life
- Natural and synthetic rubber formulation resists hardening and cracking for enhanced temperature performance
- Flow-through frame reduces blade lift-off
- OE style connector for east & secure installation
- Quiet glide micro-finish wiping edge provides clean and quiet operation
- Bosch Micro Edge Wiper Blade
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1977 - Ford Maverick | Front |
- Tie Rod End Adjusting Sleeve
- 4.72 (in) Length with 11/16 (in) x 18 Threads
- MOOG ES2004S Tie Rod End Adjusting Sleeve
- Product Attributes:
- Length: 4.75
-
Features:
- Coated for corrosion resistance
- Engineered to meet or exceed OE Performance
- Wrench flats on housing and stud provide easy installation and alignment adjustment.
- Polished Stud ball provides low socket torque.
- Stud design is optimized to provide ideal stud swing and strength for each application.
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03-84900, 0384900E, 0645217, 0928833, 12309226, 1474919, 1553703, 1634619, 26033090, 26048561, 26059034, 269-1109, 269-1113, 310252, 3200671, 3497704, 380013C01, 381484...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1971 - Ford Maverick |
Showing 1 - 10 of 1072 products
Loading...