Image
Product
Price
- Black; 3 pc.; 2 piece Front Row; 1 piece 2nd Row Fit 7-Passenger / Rear Auto Seat
- KAGU Floor Mat; Black; 3 pc.; 2 piece Front Row; 1 piece 2nd Row;
- KAGU Floor Mat
-
Features:
- 3D Digitized Design Matches Each Vehicle Application
- Raised Edges Give Maximum Coverage
- Waterproof - Effectively Protects Vehicles Interior
- Patented Bottom Layer Keeps Mats in Place w/o Harming Orig Carpet
- Shock and Sound Absorbent Inner Layer
- Easy Care Non-Slip Rubber Surface Layer
- Environmental Friendly Material/Non-Toxic and Odorless
- Carbon Fiber Embossed Pattern
- 3D MAXpider proudly offers you the highest quality floor liners and cargo liners with patented MAXpider fiber backing and innovative 3-layer construction.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Kia Carnival | Front and Rear |
- Black; 4 pc.; 2 piece Front Row; 1 piece 2nd Row; 1 piece 3rd Row Fits 8 Passenger Vehicles
- KAGU Floor Mat; Black; 4 pc.; 2 piece Front Row; 1 piece 2nd Row; 1 piece 3rd Row;
- KAGU Floor Mat
-
Features:
- 3D Digitized Design Matches Each Vehicle Application
- Raised Edges Give Maximum Coverage
- Waterproof - Effectively Protects Vehicles Interior
- Patented Bottom Layer Keeps Mats in Place w/o Harming Orig Carpet
- Shock and Sound Absorbent Inner Layer
- Easy Care Non-Slip Rubber Surface Layer
- Environmental Friendly Material/Non-Toxic and Odorless
- Carbon Fiber Embossed Pattern
- Unlike the traditional floor mats with heavy weights, commercial rubbery looking; 3D MAXpider custom-fit floor mats are the revolutionary interior protection for your vehicles with an innovative, unique three-layer structure. The digitized three dimensional design measured to exact cabin contours of your vehicle for trapping mess and spills yet, patented anti-skid backing keeps mats in place without harming the original carpet. Choices of stylish carbon fiber texture rubber surface or classic looped fabric surface.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Kia Carnival | Front, Rear and Third Row |
- 4-Way Flat Output
- CURT 56490 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Kia Telluride
- Custom Wiring Harness
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Di(2-ethylhexyl) Phthalate Which Is Known To The State Of California To Cause Cancer And Di-n-butyl Phthalate Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductiv
-
Features:
- Plugs Into Vehicle Tail Light Assembly To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Cutting Or Splicing
- 4-Way Flat Output Connects Tail Lights - Brake Lights - Turn Signals
- Equipped With Tail Light Converter For Vehicle-Trailer Compatibility
- Constructed With SMT Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Kia Telluride (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe its the boat landing at your favorite fishing spot, maybe its a campsite that overlooks one of natures masterpieces, or maybe its the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2024 - Kia Telluride | LX |
- Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Kia Seltos
- 2000 lbs. Weight Carrying Cap.; 200 lbs. WC Tongue Weight; Square Main body; Gloss Black Powder Coat
- CURT 11578 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Kia Seltos
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- WARNING CA Proposition 65: No
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Old-Style Ball Mount Can Be Flipped To Provide Drop Or Rise
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Kia Seltos (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Kia Seltos | Rear |
- Class 3 Trailer Hitch; 2in. Receiver; Select Kia Carnival
- Receiver
- CURT 13478 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Kia Carnival
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- WARNING CA Proposition 65: No
-
Features:
- Rated To 3500lbs Gross Trailer Weight And 525lbs Tongue Weight
- Engineered w/a Vehicle Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High Gloss Black Powder Coat Finish
- Co Cured In A Rust Resistant Liquid A Coat Inside And Out
- Equipped w/An Open Back Receiver For Easy Cleaning
- Limited Lifetime Warranty
- Made In USA
- Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Kia Carnival (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 525 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Kia Carnival | Rear |
- Class 3 Trailer Hitch; 2in. Receiver; Select Kia Telluride
- 750lbs. Tongue Weight
- CURT 13420 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Kia Telluride
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- WARNING CA Proposition 65: No
-
Features:
- Made With A Vehicle-Specific Design For A Custom Fit
- Provides A Convenient Mount For Hitch Accessories
- Ideal For Attaching A Snow Plow/Cargo Carrier/Other
- Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
- Tested For Safety In Accordance With Sea J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened With A Cast Welded Seamless Collar
- Equipped With An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made In USA
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Kia Telluride (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 750 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Kia Telluride | Rear |
- Class III; Square Tube; 2 Inch Receiver; 3500 Pound Weight Carrying Capacity/ 525 Pound Tongue Weight
- Trailer Hitch Rear
- Product Attributes:
- Includes Ball Mount: No
- Weight Carrying Tongue Weight (LB): 525 Pound
- Color/ Finish: Black Gloss Powder Coated
- Construction: Square Tube Welded
- Drilling Required: No
- For Use With Roll Pan: No
- Cutting Required: No
- Title: Trailer Hitch Rear
- Class: Iii
- Weight Carrying Capacity (LB): 3500 Pound
-
Features:
- Manufactured With A Vehicle-Specific Design For A Custom Fit
- Precisely Welded For Superior Strength And Fit
- Co Cured In A Rust-Resistant Liquid Bonderite (R) Coating
- Strengthened With A Welded, Seamless Collar
- Open Back Receiver For Easy Cleaning
- Husky Towing Products offers a full line of unique hitch models to provide a custom fit for your vehicle. Husky Class III receiver hitches are engineered and rigorously tested to SAE J684 standards for safety. Each hitch is protected inside and out with an industry-leading rust-resistant finish.
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Kia Sportage |
- Black; 5 pc.; 2 piece Front Row; 1 piece 2nd Row; 2 piece 3rd Row With Bucket 2nd Row~Fits 7-Seat Models
- KAGU Floor Mat; Black; 5 pc.; 2 piece Front Row; 1 piece 2nd Row; 2 piece 3rd Row;
- KAGU Floor Mat
-
Features:
- 3D Digitized Design Matches Each Vehicle Application
- Raised Edges Give Maximum Coverage
- Waterproof - Effectively Protects Vehicles Interior
- Patented Bottom Layer Keeps Mats in Place w/o Harming Orig Carpet
- Shock and Sound Absorbent Inner Layer
- Easy Care Non-Slip Rubber Surface Layer
- Environmental Friendly Material/Non-Toxic and Odorless
- Carbon Fiber Embossed Pattern
- 3D MAXpider proudly offers you the highest quality floor liners and cargo liners with patented MAXpider fiber backing and innovative 3-layer construction.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Kia Telluride | Front, Rear and Third Row |
- BumperTopper;
- BumperTopper
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- BumperTopper
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Kia Telluride |
- BumperTopper;
- BumperTopper
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- BumperTopper
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Kia Carnival |
Showing 1 - 10 of 12 products
Loading...